Questions? 623-934-8973 Login
My Order (0) Checkout
MR55B: 57" AcrEase Rough Cut Mower

MR55B: 57" AcrEase Rough Cut Mower

Item No:KZ-003724
Your Price:$4,094.99
  • SHIPS VIA:LTL Freight, 2 weeks
  • WARRANTY:1 Year Limited Warranty

Product Overview

Rough Cut model with 57" cutting width, electric start engine, manual clutch engagement and powered by a large 23 HP Briggs & Stratton Intek Twin Cylinder Engine. This model works great behind an ATV, UTV or small tractor.

Class Mower Rough Cut (Rear Discharge)
Engine Make Briggs & Stratton
Engine Model Intek OHV (Twin Cylinder)
Engine HP 23
Lubrication Method Pressure with Filter
Electric Start (Battery not included) Yes
Number of Mower Blades 2-30"
Blade Tip Speed (ft/min) 19,000
Cutting Width 57"
Cutting HeightInfinite Adjust Each Wheel) 2.0" - 8.0" By Two Cranks
ATV Tongue Standard
Blade Engagement Clutch Manual
Deck Metal Thickness 10 GA
Deck Top Plate Thickness Two Separate 1/4 in. Thick Plates
Weight 580 lbs
Pneumatic Fixed Rear Tire Yes
   (15/600x6 4 ply tubeless with precision sealed bearings)
Pneumatic Front Tires on Casters Yes
   (5.30/4.50x6 tubeless with precision sealed bearings)
Fuel Tank Size 3-3/4 Gal.
Blade Spindles
Greasable Yes
Shaft Size 30mm
Bearing # 6206-2RST
Drive Method 1 B Section "V" Belt
1 Year Warranty Non-Commercial

Key Specifications

23 HP Briggs & Stratton Intek Twin Cylinder Engine

57" Cutting width

Electric Start (Battery not included)

Briggs & Stratton 23 HP Intek Twin Cylinder engine

2-30" mower blades

Installation Guide

Warranty Details

  • Kunz Engineering, Inc., warrants to the owner that each new product is free of defects in workmanship and material for the length of 12 months from the date of purchase. Kunz Engineering, Inc., agrees to provide replacement parts for any defective parts at no charge to the owner. The customer is responsible for transportation of the mower to and from the dealer.

  • All warranty parts must be replaced with original factory parts.

  • Parts will be shipped by regular ground delivery. If next day or second day service is

    required, the customer will be responsible for additional shipping costs.

  • This warranty will not cover parts damaged for the following reasons:

    • Failure to follow proper set­up procedures outlined in the Owner’s Manual

    • Operator misuse or neglect

    • Accidents

    • Design alterations

    • Repairs not done according to manufacturer’s instructions

    • Commercial, rental, or municipality use of a homeowner model

  • Normal wear items such as belts, blades, tires, and bearings will not be covered under

    this warranty unless the original part is shown to be defective.

  • Mowing too fast in very, heavy long grass can cause the engine to pull down and

    disengage the blade clutch. Damage to the clutch springs, clutch bearing, and drive belt

    resulting when the clutch is allowed to slip will not be covered with this warranty.

  • Damage caused by overgreasing blade spindle bearings will not be covered with this

    warranty. Follow the “Lubrication” instructions in the Owner’s Manual to avoid premature

    blade spindle bearing failure.

  • All warranty claims must be submitted to Kunz Engineering, Inc. / Distributor on an OPEI

    type form within 30 days of completion or repairs.

  • Reimbursement for approved warranty claims will be as follows:

    • Labor is to be done by an authorized AcrEase dealer at a rate not to exceed $30.00 per hour

    • No more than one­half hour of labor will be paid for any warranty claim without prior approval from Kunz Engineering, INc.

    • Labor for approved claims will be reimbursed by Kunz Engineering, Inc. / Distributor

    • Any in­stock parts used for warranty repairs will be replaced by Kunz Engineering, Inc. / Distributor

  • The engines are warranted separately for parts and labor for a period of two years by the engine manufacturer. All engine warranty repairs must be done by a dealer who is authorized to work on that brand of engine.

Recently Viewed Items