MR44BC: 44" AcrEase Rough Cut Mower - 20 HP Briggs & Stratton Comm. Turf Twin Cylinder Engine

Kunz Engineering, Inc., warrants to the owner that each new product is free of defects in workmanship and material for the length of 12 months from the date of purchase. Kunz Engineering, Inc., agrees to provide replacement parts for any defective parts at no charge to the owner. The customer is responsible for transportation of the mower to and from the dealer.

All warranty parts must be replaced with original factory parts.

Parts will be shipped by regular ground delivery. If next day or second day service is

required, the customer will be responsible for additional shipping costs.

This warranty will not cover parts damaged for the following reasons:

• Failure to follow proper set�up procedures outlined in the Owner�s Manual

• Operator misuse or neglect

• Accidents

• Design alterations

• Repairs not done according to manufacturer�s instructions

• Commercial, rental, or municipality use of a homeowner model

Normal wear items such as belts, blades, tires, and bearings will not be covered under

this warranty unless the original part is shown to be defective.

Mowing too fast in very, heavy long grass can cause the engine to pull down and

disengage the blade clutch. Damage to the clutch springs, clutch bearing, and drive belt

resulting when the clutch is allowed to slip will not be covered with this warranty.

Damage caused by overgreasing blade spindle bearings will not be covered with this

warranty. Follow the �Lubrication� instructions in the Owner�s Manual to avoid premature

blade spindle bearing failure.

All warranty claims must be submitted to Kunz Engineering, Inc. / Distributor on an OPEI

type form within 30 days of completion or repairs.

Reimbursement for approved warranty claims will be as follows:

• Labor is to be done by an authorized AcrEase dealer at a rate not to exceed $30.00 per hour

• No more than one� half hour of labor will be paid for any warranty claim without prior approval from Kunz Engineering, INc.

• Labor for approved claims will be reimbursed by Kunz Engineering, Inc. / Distributor

• Any in�stock parts used for warranty repairs will be replaced by Kunz Engineering, Inc. / Distributor

The engines are warranted separately for parts and labor for a period of two years by the engine manufacturer. All engine warranty repairs must be done by a dealer who is authorized to work on that brand of engine.